Average Reviews:
(More customer reviews)First, I bought this after comparing it to the Delta ($$$), General International, the Shop Fox and the Grizzly.For the money I don't think you could do better.
It's not a finish sander but if you need to remove stock to make a drawer fit, flush up a veneer, or bevel an edge it works very well.And, it works very, very fast with the supplied 100 grit belt.Stock is removed a little faster than some other machines because of the speed of the belt.That's not a bad thing, just something to be aware of.It comes with a great belt from Klingspore, but you might want to go with a higher grit.
The other review complains that there's only 1/2" oscillation and that makes the machine worthless.First, it's a worthwhile feature because it extends the life of the belt and reduces cleanings.Second, all the machines of this size oscillate 3/4" - I'm not sure what the other reviewer is looking for, but it's a 6" belt - the more it oscillates the less usuable height you have.So, a sander that oscillates 3" would limit you to a 3" drawer or give uneven sanding.
The dust chute isn't designed well because you can't leave the side table with it on.I know one guy who did a little grinding to the chute to make it fit.
The problem I have with the scale is that it's very hard to see when locking the angle.I've never had a machine with perfectly set detents at 0, 45, or 90 degree so what's the point?Good detents are user adjust able and add to the expense.
The storage cabinet is nice, but the door should be wider.Oh well, it's better than not having one.The table is heavier than the others the other reviewer mentioned which makes adjusting it is more of a chore, but the extra weight is a good thing.It dampens the vibrations and makes the machine more heavy duty.If the weight is that much of an issue make a table out of plywood ;>)I'm sticking with the cast iron.
All in all a great machine, and I'd highly recommend it.
Click Here to see more reviews about: JET 708447 OES-80CS 6 Inch 1-1/2-Horsepower Oscillating Edge Sander, 115/230-Volt 1-Phase
Product Description:
Wide-ranging features and capabilities make the JET 708447 OES-80CS 6-Inch 1-1/2 HP Oscillating Edge Sander, 115/230-Volt 1-Phase a valuable addition to your home shop. This efficient tool offers the accuracy and durability you need in one exceptionally well-designed package. Edge, face, bevel, and contour sand with the OES-80CS, and enjoy both the power for big jobs and the necessary control for fine work.
The JET OES-80CS 6-Inch
Oscillating Edge Sander offers:
A 1 1/2 HP, 115/230-volt TEFC motor for reliable performance
A rubber-coated drum for consistency
A belt speed of 3900 SFPM (surface feet per minute) for versatility
Oscillating action that improves efficiency and protects work surfaces
The four-inch dust port connects to your dust collection system, so it's simple to keep your shop clean and safe.
The OES-80CS is an accurate, durable, and versatile sander. View full diagram.
The contour table makes sanding inside and outside curves easy and accurate.
The idler drum with oscillating action and a reliable belt tensioning mechanism ensure efficient, effective sanding.Power Motor for Robust Performance
The OES-80CS comes equipped with a 1 1/2 HP, 115/230-volt (pre-wired 115-volt) TEFC (totally enclosed fan cooled) motor to deliver plenty of power for efficient and consistent performance. Mounted on the front, a simple, industrial style push-button switch controls the sander and is within easy reach even when you're operating the tool.
Sanding Belt Drive for Versatile Sanding Speed
The motor power is transmitted to the 6 x 89 inch-long abrasive belt via a 4-1/2-inch diameter, rubber-covered aluminum drum. The result is a 3900 SFPM (surface feet per minute) belt speed, optimum for sanding virtually any species of wood with the wide range of grits available. The rubber-coated drum ensures smooth, slip-free transfer of the motor power for highly consistent sanding. At the same time, an equally sized aluminum drum on the other end actually imparts the oscillating motions to the belt while keeping it tracking correctly.
Oscillating Action Prevents Overload and Burning
This sander operates with a 1/2-inch stroke that oscillates 108 times per minute, which utilizes a much larger area of the belt than straight-line belt sanders. The oscillating action also prevents loading of the sandpaper in one area, which has the adverse effect of stretching the life of the sanding belt to its fullest potential. Additionally, oscillation greatly reduces the amount of heat produced, thereby helping to prevent any burning of the work piece or sanding belt.
Quick and Easy Adjustments
A simple lever-operated tension release makes changing the belt fast, easy, and tool free. Even the belt guard can be removed and installed with a pair of large finger-operated knobs. You can also conveniently adjust the top-mounted belt tracking system with the included wrench, and you can take advantage of the motor mount's tracking adjustment should it be necessary.
Cast-Iron Table for Precise Results
The OES-80CS features a cast-iron table measuring 30 x 10 inches front to back that has been precision-ground flat and has a full-length miter slot machined into it. Additionally, the table can be adjusted up and down for precise alignment of the workpiece, and the included miter gauge makes precise end or miter saw sanding much easier.
Dust Collection for a Cleaner Shop
To help keep your workspace clean, the OES-80CS includes a dust port with four-inch diameter that's built into the hinged end of the belt guard. The belt guard system also helps direct the dust towards the port as well as focus the vacuum power of your dust collector on the belt to maximize efficiency.
The OES-80CS is covered by a five-year warranty and includes an all-steel enclosed base cabinet, which offers support and valuable storage space for abrasive belts and related tools or supplies.
About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What's in the Box
One front panel with door (stand), one rear panel (stand), two side panels (stand), one shelf, two M5x10 screws, two M5 flat washers two, M5 lock washers, one extension table assembly, one drum guard and dust port, owner's manual, warranty card, one table and motor unit, one miter gauge assembly, one sanding belt, and cabinet hardware.
Get 31% OFF
Want to read more honest consumer review about JET 708447 OES-80CS 6 Inch 1-1/2-Horsepower Oscillating Edge Sander, 115/230-Volt 1-Phase now ?
